The Weller Push Trailer "Pronghorn" model was designed to be versatile for both commuting and traveling long distances. Conservatively, many of our clients travel more than 50 miles on a 2 liter tank. That is, on average, 100 miles per gallon of gas! The results should be even better at lower altitudes.
The Weller Push Trailer is uniquely designed to be attached and removed with one bolt!
The Yoke assembly (attachment point) can remain on the bike or removed and used on a different bike.
The frame is specifically fabricated to allow for maximum rear tire movement.
A remote throttle control is provided and can be mounted on the left or right side of the handlebars.
The Weller Push Trailer can carry gear on a removable carrying rack. For the traveler or commuter this is a must!
Sealed high quality bearings assure minimal maintenance of the rear wheel assembly.
The "Pronghorn" can be mounted on an infinite number of bikes, including full suspension bikes. Bikes with wheels larger than 26 inches may not have adequate clearance between the rear tire and the Weller Push Trailer frame.
Once the Weller Push Trailer is properly attached, the bike and trailer is integrated as one. For example, when you lean to one side or the other, it will also take on the angle of the bike.
The "Pronghorn" is specifically designed to handle rolling hills, streets and light gravel or dirt roads.
Weller Push Trailers have been tested for many hundreds of miles.
The trailer can easily reach speeds over 30 miles per hour with a 200 Lb. rider and climb most rolling hills without assistance.
Warning: The throttle should be limited to the riders ability and local speed restrictions for motorized bikes. The owner has the ability to adjust the top speed with a limiter screw. See assembly video for details.
By having the engine mounted on the trailer instead of installed on the bike, the rider is not affected by heat or noise from the engine. This makes for a more peaceful ride.
What do I get for my money?
You'll receive the only gas powered push trailer on the market with a Patent Pending Design!
All orders are custom made. Depending on the build and available parts, most Weller Push Trailers are built within 2 weeks, then shipped. Shipping time will depend on location.
Shipping is provided through Greyhound Package Express. The Weller Push Trailer will be delivered to the nearest station. The customer must pick it up. Weller Push Trailers decided on this method to reduce the cost of shipping to the consumer. Due to the push trailer's dimensions and weight other carriers quotes were three times as much making it unaffordable for consumers.
Note: Special offer to Idaho residents within 100 miles of Boise Idaho. For these consumers, Weller Push Trailerswill deliver a fully assembled push trailer and if the consumer has a new 79cc Harbor Freight engine, will also install the throttle parts. Prior to ordering, please send an email via this website to validate location and establish communication.
The Weller Push Trailer is pre-assembled to ensure proper form and function.
Your custom push trailer is built with the finest quality parts and materials including;
Sealed Wheel and Jack-shaft bearings Upgraded Larger tire (NO CHARGE)
Heavy Duty Rims
Quality American Steel
Good Quality Chain(s)
The best clutch assembly available
Designed and built to last a lifetime. Enjoy it and pass it on to your children.
All Weller Push Trailers have a serial number.
Due to DOT classification codes the Weller Push Trailer does not have a title, but will have an original Bill of Sale to establish ownership.
Registration, by law, requires proper documentation. For example, the Idaho Parks and Recreation Department will need this information to "Register" your Weller Push Trailer. This allows you to ride on roads available to motorized travel in the thousands of miles of federal and state lands. Make sure you write down the engine serial number and sign the Bill of Sale.
Upgrade Hilliard's Extreme Duty Clutch (select at checkout)
The upgraded clutch provides the owner with the the best clutch on the market. This is a direct replacement of the standard clutch. Hilliard's new patent pending extreme duty centrifugal clutch handles higher temperatures to offer longer clutch life. This clutch dissipates heat better while extending clutch life. The clutch is easily tuned for your specific needs. It has a quick change spring and sprocket design and a built-in internal keyway with a 5/8 inch shaft. Note: The Hilliard Extreme Duty Clutch is a slight bit noisier than the standard but will provide longer overall life.
OPERATE AT YOUR OWN RISK!
Operating the Weller Push Trailer, is at your own risk. The operation and use is strictly at the discretion of the rider. Due to the potential hazards associated with powered assistance, children under the age of 18 and riders with limited experience should not operate the Weller Push Trailer.
Waiver of Liability
When submitting your order and purchasing our products, the buyer and users are releasing the manufacturer and Weller Push Trailers from all liability relating to injuries that may occur during the use of our products. By purchasing the product(s), you agree to hold the manufacturer, owners, Weller Push Trailers and PushTrailers.com entirely free from any liability, including financial responsibility for injuries incurred, regardless of whether injuries are caused by negligence. In no event shall our company be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of our products.
You also acknowledge the risks involved in operating a motorized push trailer. These include but are not limited to use or misuse of our product. You swear that you are participating voluntarily, and that all risks have been made clear. Additionally, you do not have any conditions that will increase your likelihood of experiencing injuries while engaging any activity involving part or all of the products we sell.
By purchasing our products, you forfeit all right to bring a suit against Weller Push Trailers, PushTrailers.com and it’s owners and the manufacturer for any reason. In return, you will also make every effort to comply with safety laws, traffic laws, restriction of use in your area, and any other law that provides you with guidance for safe/legal operation. If you have questions for the use of PushTrailers.com products, you will ask for clarification when needed.
The Pronghorn is designed to be used primarily for commuting $599.00 + shipping
Engine Shipped Separately Important!
The 79cc Harbor Freight engine is designed to be used with our product and is the only engine tested. The frame is not designed to handle engines above 79cc.
, The Push Trailer will be invoiced through PayPal so you have infinite ways to pay. If interested please contact me via the Contact Us Page. We will work out the details!
All Weller pushtrailers are custom made according to the type of bike you ride and your color choice. They are interchangeable between bikes. You can expect them to last a lifetime with proper care. If you pick it up, I'll assemble and test the trailer for free. No shipping charges.
Shipping is normally $125.00 , I'll take $50.00 off to reduce your shipping cost.
Weller Push Trailers only ship to the lower 48 states. NO OVERSEAS ORDERS