Motorized assistance for mountain biking or cruising
Can be loaded with additional gear for camping, hunting, or pleasure riding
Designed to follow behind the bike without adding weight, permanent motors, extra chains, and gizmos that could render your bike inoperative for normal use.
Why would someone want a Weller Push Trailer?
For the avid mountain bike riders that enjoy the thrill of exploring expansive territories in a short period of time.
For those that commute long distances or use their bikes for daily errands.
The trailer provides additional assistance to people that enjoy traversing hills, back roads, and mountain terrain.
For those that enjoy their bikes but don't want to dedicate it to some sort of motorized assistance.
In Idaho there are thousands of miles of Forest Service roads and state trails open to the public. There are several options for the adventurer to access these roads.
Weller Push Trailers provide the rider with the option to use all trails open to vehicles, ATVs, UTVs, and motorcycles. In addition, all of the non-motorized access points when you turn the engine off.
Weller Push Trailers
The "GOAT""BEAST" push trailer was originally designed for the outdoors man.
It's compact, easy to transport and provides a means to cover large expanses of land. The Weller Push Trailer is quite, and economical to operate.
With a simple add-on, the GOAT can transport your gun or other gear. The optional gun rack bar attaches to the trailer to support the gun and additional tools.
The Weller Push Trailer is small and easily fits in the trunk of a car, back of a SUV, or the bed of a truck.
The Weller Push Trailer is portable, easy to attach and disconnect, simple to maintain, and service.
The "GOAT" dimensions are length 54" x width 12" x height 32". Weight 30 lbs. without engine and with engine 70 lbs.
More information can be found on the Store page.
The "PRONGHORN" push trailerwas designed for both commuting and traveling long distances.
Conservatively, many of our clients travel more than 50 miles on a 2 liter tank. That is, on average, 100 miles per gallon of gas! The results should be even better at lower altitudes.
The "Pronghorn" is specifically designed to handle rolling hills, streets and light gravel roads.
The "Pronghorn" been tested for many hundreds of miles.
The trailer can easily reach speeds over 30 miles per hour with a 200 Lb. rider and climb most rolling hills without assistance.
The "PRONGHORN" dimensions are length 47" x width 12" x height 27". Weight 25 lbs. without engine and with engine 55 lbs.
More information can be found on the Store page.
How does the trailer affect handling?
Once the Weller Push Trailer is properly attached, the bike and trailer is integrated as one. For example, when you lean to one side or the other, it will also take on the angle of the bike.
Do you have to license the trailer?
This would be an individual state question. In Idaho, yes! To ride in the back country, you'll need a sticker that is renewable each year. This gives you access to thousands of miles of Forest Service roads and state trails. Please contact your local Parks and Recreation Department. The State of Idaho will need your Bill of Sale.
How much weight can you carry on the trailer itself?
This is determined by the rack weight limitations of the manufacturer. All Weller Push Trailers come with an adjustable bike rack post as an added bonus! The trailer is not designed to carry an extra rider. DO NOT ATTEMPT! DO NOT ATTACH CHILD SEATS!
Why does the trailer hook to the seat post not the rear wheel?
With the seat post, the trailer can be integrated with the frame of the bike. The trailer no longer is something you pull but it is an extension of your bike, giving you positive control.
What do I get for my money? You'll receive the only gas powered push trailer on the market with a Patent Pending Design!
All orders are custom made. Depending on the build and available parts, most Weller Push Trailers are built within 2 weeks, then shipped. Shipping time will depend on location.
Shipping is only available in the lower 48 states. Does not include Alaska and Hawaii. Sorry.
Shipping is provided through Greyhound Package Express. The Weller Push Trailer will be delivered to the nearest station. The customer must pick it up. Weller Push Trailers decided on this method to reduce the cost of shipping to the consumer. Due to the push trailer's dimensions and weight other carriers quotes were three times as much making it unaffordable for consumers.
Note: Special offer to Idaho residents within 100 miles of Boise Idaho. For these consumers, Weller Push Trailerswill deliver a fully assembled push trailer and if the consumer has a new 79cc Harbor Freight engine, will also install the throttle parts. Prior to ordering, please send an email via this website to validate location and establish communication.
The Weller Push Trailer is pre-assembled to ensure proper form and function.
Your custom push trailer is built with the finest quality parts and materials including;
Sealed Wheel and Jack-shaft bearings
Heavy Duty Rims
Quality American Steel
Good Quality Chain(s)
The best clutch assembly available
Designed and built to last a lifetime. Enjoy it and pass it on to your children.
All Weller Push Trailers have a serial number.
Due to DOT classification codes the Weller Push Trailer does not have a title, but will have an original Bill of Sale to establish ownership.
Registration, by law, requires proper documentation. For example, the Idaho Parks and Recreation Department will need this information to "Register" your Weller Push Trailer. This allows you to ride on roads available to motorized travel in the thousands of miles of federal and state lands. Make sure you write down the engine serial number and sign the Bill of Sale.
What kind of warranty is provided? The frame assembly is exclusive to Weller Push Trailers, LLC.. All other parts are extremely high quality parts from third party vendors and are warranted forthirty days . If part is deemed defective by Weller Push Trailers, LLC., the part will be shipped free of charge. The customer will be responsible for installation.
There is a six month warranty on the frame and Yoke assembly for manufacturer's defects.
This warranty is specific to normal wear and tear and does not include;
Alterations of any kind
Misuse by excessive load beyond the weight limit of the rack.
Rust or corrosion due to weathering or deicing agents.
Neglect of normal care and maintenance
The chain, tire and clutch assembly have no warranty because it is incumbent of the customer to properly maintain these parts or replace them after the life of the part is expired. If properly maintained, the clutch and chain should last for years.
To return the frame assembly to our facility, the consumer must contact Weller Push Trailers via email for authorization. If returning the frame, the consumer will be responsible for shipping costs to our facility. If found defective, Weller Push Trailers will replace or repair the frame or Yoke assembly and return at no cost to the consumer. If damage is found to be other than normal wear and tear, the customer will be responsible for repair cost and return shipping.
Engine Shipped Separately
For the "GOAT" a 79cc Harbor Freight engine is designed to be used with this product and is the only engine tested. The frame is not designed to handle engines above 79cc.
For the "BEAST" a 212cc Harbor Freight engine is designed to be used with this product and is the only engine tested. The frame is not designed to handle engines above 212cc.